Table of Contents
Advertisement
Mainboard Installation
Standard CMOS Setup
The items in Standard CMOS Setup Menu are divided into 10 categories. Each category includes no, one or
more than one setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn>
keys to select the value you want in each item.
Date & Time
Enter current Date & Time to set system clock. The date format is <month> <day> <year> and the time
format is <hour> <minute> <second>. The time is calculated based on the 24-hour military-time clock.
Primary and Secondary Master / Slave
The categories identify the types of IDE hard disk on primary or secondary IDE channel that have been
installed in the computer. There are 46 pre-defined types and a user definable type. Type "1" to Type "46"
are predefined. Type "User" is user-definable.
Press PgUp or PgDn to select a numbered hard disk type or type the number and press <Enter>. Note that
the specifications of your drive must match with the drive table. The hard disk will not work properly if
you enter improper information for this category. If your hard disk drive type is not matched or listed, you
can use Type User to define your own drive type manually.
If you select Type "User", related information
is asked to be entered to the following items. Enter the
information directly from the keyboard and press <Enter>. This information should be provided in the
documentation from your hard disk vendor or the system manufacturer.
There are the option of Type "AUTO" and Mode "AUTO" to auto detect the hard disk type and the hard
disk mode (Normal, LBA and Large). If a hard disk has not been installed select NONE and press <Enter>.
Page 23
Advertisement
Table of Contents
