Table of Contents
Advertisement
About Soft Touch Power Button
For the ATX system case, the new soft touch power button replaces the main power switch to switch ON /
OFF your system. You can switch the system ON by pressing the button. If you want to switch OFF your
system, press the button and hold it for 4 seconds. You can also change the functions of the power button in
the CMOS setup at power management section.
Infra-Red connector
Serial port 2 can be configured to support an IrDA module via a 5-pin header connector. Once configured
for IrDA, the user can transfer files to or from portable devices such as laptops, PDA's and printers using
application software such as LapLink. The IrDA specification provides for data transfers at 115 Kbps from
a distance of 1 meter. Consumer IR is also supported by the same connector.
JP15 Pin
1
2
3
4
5
Signal Name
VCC, power source
N/C
IRRX, infra-red receive
N/C
IRTX, infra-red transmit
Page 14
Mainboard Installation
Advertisement
Table of Contents
