Table of Contents
Advertisement
VIA 693 Socket 370 AT Mainboard
4.4 STANDARD CMOS SETUP
Date (mm : dd : yy) : Thr,
Time (hh : mm : ss : 14 : 59 : 21
HARD DISKS
Primary Master
Primary Slave
Secondary Master
Secondary Slave
Drive A : 1.44M, 3.5 in.
Drive B : None
Floppy 3 mode support : Disabled
Video
: EGA/VGA
Halt On : All Errors
ESC : Quit
F1 : Help
Fig. 4-3 STANDARD CMOS SETUP screen.
MODE :
The BIOS on the mainboard is the updated one and which provides three different
modes to support both normal IDE HDD and the one which is above 528MB:
NORMAL : For IDE hard disk drives which is smaller than 528MB.
LBA
: For IDE hard disk drive which is above 528MB (ideally, it can be as big
as 8.4GB ) that use Logic Block Addressing (LBA) mode.
Large
: For IDE HDD which is above 528MB and does not support LBA mode.
Note : "large mode" may not be fully supported by all operation systems. It is suggested
to be used with the MS-DOS, such HDD is not popular nowadays.
Auto
: This mode will auto-detect your IDE driver during boot-up.
(Note: Some certain operation systems (such as SCO®-UNIX™ ), only "NORMAL
mode" is allowed when installation.)
Floppy 3 Mode Support: (Default setting: disabled )
This mode is for the Japanese 3.5 inch floppy disk drive. If you have such drive
installed in your PC system, please select enable, otherwise, use the default setting.
4.5 BIOS FEATURES SETUP
ROM PCI / ISA BIOS (2A6LGP8H)
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.
May
7 1999
TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE
Auto
0M
0
None
0M
0
Auto
0M
0
None
0M
0
: Select Item
(Shift)F2 : Change Color
AWARD BIOS SETUP
0
0
0
0
0
0
0
0
Base Memory :
Extended Memory : xxxxxx K
Other Memory : xxxxxx K
Total Memory : xxxxxx K
PU/PD/+/- : Modify
4-3
0
0
Auto
0
0
------
0
0
Auto
0
0
------
640 K
Advertisement
Table of Contents
