VIA Technologies Zida BX983D User Manual page 22

Mainboard Installation
Standard CMOS Setup
This setup page includes all the items in a standard compatible BIOS.
BIOS Features Setup
This setup page includes all the items of Award special enhanced features.
Chipset Features Setup
This setup page includes all the items of chipset special features.
Power Management Setup
This setup page includes all the items of green features.
PnP/PCI Configuration
This setup page includes all the items of PnP , PCI IRQ and ISA IRQ settings. You can allocate these
resources for your system use in this menu.
Integrated Peripherals
This setup page is used to configure the On-board multi I/O and IDE interface.
Load BIOS Defaults
This function is for user to load the BIOS default settings. The BIOS defaults indicates the most
appropriate value of the system parameter which the system would be in minimum performance.
Load SETUP Defaults
This function is for user to load the SETUP default settings. SETUP defaults indicates the values required
by the system for the maximum performance.
Supervisor/User Password
This function is for Change, set, or disable the supervisor or user password. The supervisor password
allows you to limit the user access to the system and Setup.
IDE HDD Auto Detection
Automatically configure hard disk parameters.
HDD Low Level Format
This Automatically configure hard disk parameters.
Save & Exit Setup
Save CMOS value changes to CMOS and exit setup.
Exit Without Save
Abandon all CMOS value changes and exit setup.
Page 22