VIA Technologies Zida BX983D User Manual page 33

RTC Alarm Resume
When Enabled, you can set the date and time at which the RTC (real-time clock) alarm awakens the system
from Suspend mode
The choice: Enabled, Disabled.
Date (of Month) / Timer (hh:mm:ss)
You could set the date (of month) and timer (hh:mm:ss), any event occurring at will awaken a system
which has been powered down.
Primary INTR
When set to On (default), any event occurring at will awaken a system which has been powered down.
The following is a list of IRQ's, Interrupt ReQuests, which can be exempted much as the COM ports and
LPT ports above can. When an I/O device wants to gain the attention of the operating system, it signals
this by causing an IRQ to occur. When the operating system is ready to respond to the request, it interrupts
itself and performs the service.
As above, the choices are On and Off. Off is the default.
When set On, activity will neither prevent the system from going into a power management mode nor
awaken it.
•
IRQ3 (COM 2 )
•
IRQ4 (COM 1)
•
IRQ5 (LPT 2)
•
IRQ6 (Floppy Disk)
•
IRQ7 (LPT 1)
•
IRQ8 (RTC Alarm)
•
IRQ9 (IRQ2 Redir)
•
IRQ10 (Reserved)
•
IRQ11 (Reserved)
•
IRQ12 ( PS / 2 Mouse )
•
IRQ13 (Coprocessor)
•
IRQ14 (Reserved)
•
IRQ15 (Reserved)
Page 33
Mainboard Installation