Features Summary - VIA Technologies Zida BX983D User Manual

FEATURES SUMMARY

This motherboard comes with following features:
þ
Supports Intel PENTIUM II
þ
Supports Intel Socket 370 Celeron
þ
Optimized for the highest performance Intel PENTIUM II
BX98-3D
þ
Optimized for the highest performance Intel Socket 370 Celeron
side bus for BX3D-CT
þ
AWARD PnP BIOS with support for power management, enhanced IDE/SCSI features and desktop
management interface (DMI) which allows higher level of hardware compatibility.
þ
Flash BIOS for a more easy upgrade path.
þ
Three 168-pin DIMM sockets support up to 768MB SDRAM
þ
One Accelerated graphic port (AGP) for AGP card.
þ
Two 16-bit ISA expansion slots and four 32-bit PCI expansion slots.
þ
Integrated two PCI bus mastering Ultra IDE controller with two on-board connectors supporting up to
four IDE devices such as Hard Disk, CD-ROM or Tape Backup drives.
þ
Integrated super I/O chip featuring one floppy disk controller, two 16550 UART compatible serial
ports, one high speed EPP/ECP parallel port, one Infra Red port.
þ
Supports "Auto Jumper " for detecting CPU configurations.
þ
WAKEUP-LINK interface header supporting Intel Wake-On-LAN
þ
Support either an AT or an ATX power supply
þ
Support " Modem Ring Wakeup "
Celeron Processor with automatic voltage adjustment for BX98-3D.
® or ®
Processor with automatic voltage adjustment for BX3D-CT.
®
Page 5
Mainboard Installation
® processors with 100 MHz front-side bus for
® processors with overclock 100 MHz front-