Extron electronics DMS 1600 Setup Manual page 4

FCC Class A Notice
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC rules. The Class A
limits provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause interference; the interference must be
corrected at the expense of the user.
NOTE:
compliances, EMI/EMF compatibility, accessibility, and related
topics, see the "
on the Extron website.
FDA/IEC 60825-1 Requirements
CLASS 1 LASER PRODUCT
Complies with FDA performance standards for laser products except for
deviations pursuant to Laser Notice No. 5, dated June 24, 2007.
The product is intended to be used with the fiber optic cables fully installed.
This product meets the applicable requirements of IEC 60825-1, Edition 1
(2007).
Any service to this product must be carried out by Extron Electronics and
its qualified service personnel.
For more information on safety guidelines, regulatory
Extron Safety and Regulatory Compliance Guide "