NEC 78K0S/KU1+ User Manual page 184

(2) STOP mode release
Figure 11-4. Operation Timing When STOP Mode Is Released
<1> If high-speed internal oscillation clock or external input clock is selected as system clock to be supplied
STOP mode
is released.
STOP mode
System clock
oscillation
CPU clock
<2> If crystal/ceramic oscillation clock is selected as system clock to be supplied
STOP mode
is released.
STOP mode
System clock
oscillation
CPU clock
Note The operation stop time is 17
The STOP mode can be released by the following two sources.
184
CHAPTER 11 STANDBY FUNCTION
Operation
High-speed internal oscillation clock or external clock input
Note
stops .
HALT status
Operation
Note (oscillation stabilization time set by OSTS)
stops .
µ
s (MIN.), 34
User's Manual U18172EJ2V0UD
Crystal/ceramic oscillation clock
µ µ
s (TYP.), and 67 s (MAX.).