Return Home - Protocol KODIAK GPS Instruction Manual

RETURN HOME

Press and hold the Return Home button for 2 seconds and the drone will return
back to the area where it took off from.
When in the Return Home mode, the drone may not take a direct path back to the
take off location due to satellite signals and other variants. You can make minor
directional adjustments to avoid obstacles but complete control will be disabled.
If you feel that you have lost control of the drone, exit Return Home and
press land.
* To exit Return Home mode, press and hold the Return Home button for
2 seconds. The remote control will beep twice indicating that it has left
Return Home.
** If the drone is under 20m high, it will fly to 20m and then Return Home.
*** If the GPS signal is weak, the return home function will not work and you will
need to manually fly the drone back to you.
**** Dependent on the GPS signal, the drone may not return to the precise
location from where it took off from. Variation of a few feet is to be expected.
GEO-FENCING
The drone's GPS will automatically create a virtual boundary to keep the drone
within transmission range. The boundary will extend to 200 meters from take-off.
When the drone reaches the boundary, it will stay there and not fly further away.
*Wind can affect the Geo-Fencing function and push the drone out of the
boundary. Always exercise caution when flying outdoors.
11