Protocol KODIAK GPS Instruction Manual page 11

START-UP PROCEDURE
HEADLESS MODE (OPTIONAL):
Users have the option to exit the default orientation. In Headless Mode, users can
operate the drone without orientation. Regardless of where the drone is pointing,
it will turn left or right according to the remote's command.
Headless Mode is good for beginners and is useful for drones that fly too far away
for the user to be able to tell the orientation.
Follow the below instructions to change to Headless Mode:
1. It is easiest to set up Headless Mode before flight. Sync the drone with
the controller.
2. Make sure your drone is aligned with the remote as indicated in the picture.
3. Press the direction stick in and hold for around 2 seconds. The remote will
beep 8 times and the drone lights will flash every 4 seconds. This indicates
that the drone is now in Headless Mode.
4. Press the direction stick in and hold for around 2 seconds again to
leave Headless Mode. The remote will beep once to indicate it has left
Headless Mode.
Headless Mode
(press in for 2 seconds)
7