Protocol KODIAK GPS Instruction Manual page 20

APP INSTRUCTIONS & PHOTO/VIDEO
SHOOTING PHOTOS AND VIDEO:
1. Turn on the drone/remote and sync.
2. Push either the front camera or bottom camera button on the remote.
3. Photo: Push the Photo button and the camera will take a photo. The lights
on the drone will flash once as it's taking the picture.
4. Video: Push the Video and the camera will begin to record. The lights on
the drone will flash continuously while recording. Push the Video button
again and the camera will stop recording.
5. Press the memory card to unlock and remove. Plug it into a USB card
reader. Then plug the card reader into the USB port of your computer.
6. Open the drive and then open the Video or Photo folders to access the
MP4 or JPEG files.
WARNING: Never remove the card from the video camera while the drone is
turned on.
*Memory card not included
16