Setting Up Magicstream Laminars With An Automation Control System - Pentair MAGICSTREAM LAMINAR Installation And User Manual

18
SETTING UP MAGICSTREAM
WITH AN AUTOMATION CONTROL SYSTEM
EasyTouch ® Control System
The following describes how to setup the MagicStream
Control System indoor control panel or wireless control panel. From the EasyTouch
control system control panel you can control the light shows.
To set up a MagicStream laminar circuit; assign the "Light Circuit Name" to the relay
circuit (example; AUX 3, as "Pool Light") and "Function": assign the name "Pool Light"
circuit in the Circuit Func menu as a "light" circuit (IntelliBrite). After assigning the circuit
name and function, the light circuit name "Pool Light" can be setup in the CONFIG menu
for light position, color etc.
To assign a Circuit Name go to: MENU > SETTINGS > CIRCUIT NAMES
IntelliFlo
IntelliChlor
Circuit Names
Circuit Func.
1. Press the Up/Down button to select a circuit number 1/18. Press the Up button
two times to select AUX 1 to choose this circuit for a light circuit On/Off button.
The circuit number (1/18) corresponds to its assigned circuit name.
2. Press the Up/Down button to scroll through the list of preset names. Select a
name such as "Pool Light." AUX 1 has now been assigned the circuit name "Pool
Light."
To assign a Circuit Function go to: MENU > SETTINGS > CIRCUIT FUNC.
Circuit / Func. :
[POOL LIGHT
[INTELLIBRITE ]
Freeze: No
3. Press the Menu button to return to the Settings menu. Press the Down button
to and select "Circuit Func." Press the Right button to access the Circuit Func.
menu.
4. Press the Up/Down button to select the already assigned circuit name "Pool
Light."
5. Press the Right button to view "Circuit Functions" to assign to light circuit "Pool
Light."
6. Press the Up/Down button to select the type of light circuit function to use. Se-
lect "INTELLIBRITE" for the MagicStream laminar circuit function.
7. Press the Menu button three times to return to the main screen.
Operating the MagicStream laminars: The MagicStream laminar is ready to operate
using the EasyTouch control panel button 1 (auxiliary 1 circuit). To access the Lights
menu screen (special Light Features), press Menu > Lights. The Lights menu settings
are: MODES, COLORS, ALL ON, ALL OFF, SYNC, MAGICSTREAM, CONFIG: From the
Modes screen you can control the color light shows. To access the Modes menu, press
Menu > Lights > Modes. See page 6 for MagicStream light color shows.
MAGICSTREAM ® Laminar Installation and User's Guide
Circuit Names
Circuit #: 1/18
Circuit : AUX 1
[POOL LIGHT
]
®
LAMINARS
®
Laminars from the EasyTouch
]