Saving A Color Mode Or Fixed Color; Powering On The Light; Hold And Recall Feature; Troubleshooting - Pentair IntelliBrite Installation And User Manual

2
Operating IntelliBrite

Saving a color mode or fixed color

When power is switched off to the IntelliBrite
the light is powered on, the previously saved color show mode or fixed color will be displayed. For example, while in "Party
Mode" switch the light off. Wait more than 10 seconds, switch the light back on to resume "Party Mode."

Hold and Recall feature

Hold: Use the Hold feature (power-cycle 13 times) to capture and save a color effect while displaying one of the light
show modes. It's easier to capture custom color effects from one of the slower light show modes, such as
"Romance Mode" (#3).
Capture a unique color effect
while "Romance Mode" is active.
Recall: Use the Recall feature to activate the last saved color effect (using the Hold feature) while in color show mode
or fixed colors. To recall the color effect, power-cycle 14 times, and after five seconds the last saved color effect will be
displayed.
While the light is on in
color show or fixed mode.

Powering on the light

When the IntelliBrite ®
selected color.
Note: If power to the light is off for more than five seconds, the last color show mode or fixed color that was saved
will be displayed.

Troubleshooting

Use the following tips to help to resolve problems that might occur while operating the LED light.
P o r b e l
T h e g i l
L g i t h d
Instead of using a wall switch, the IntelliBrite
®
The IntelliBrite Controller [P/N 600054] provides complete control of Pentair Water Pool and Spa
diode) lights, and IntelliBrite LED landscape lights. It's easy to select a lighting feature, just dial in any one of the pre-programmed color light
shows or fixed colors. Using the Hold and Recall buttons you can also create endless unique lighting effects.
®
The IntelliBrite Controller can control individual or multiple IntelliBrite
junction box to an IntelliBrite
Maximum wattage when using multiple lights with IntelliBrite
When using multiple IntelliBrite
The following example combination of IntelliBrite
®
• Two (2) IntelliBrite LED pool lights (each light 70 Watt maximum)
• One (1) IntelliBrite ® LED spa light (each light 40 Watt maximum)
• Eight (8) IntelliBrite LED landscape lights (each light 15 Watt maximum)
®
LED Lights using a wall switch
® lights, the last color show mode or fixed color will be saved. The next time
Turn switch off/on 13 times
to save color effect.
Turn switch off/on 14 times to
activate last save color effect.
LED light is powered on, a momentarily white light will illuminate, followed by the previously
m C a u
t h w l l i n o i t u l l m n i t a . e C h e
o e s n t o u f n t c o i n p o r p r e . y l C h e
a n d
B e s
® LED pool light can be used with an IntelliBrite
® Controller so that all lights can be switched on and off together.
®
LED lights, the total allowable light wattage is 300 Watts maximum.
® LED lights can be connected to the IntelliBrite
On
▼
▼
Off
On
▼
▼
Off
s e A / t c o i n
k c h t e g o r u n d a f u t l w r i n i g a n d e r s
k c h t e g i l t h w r i n i g c o n n e t c o i n o t h t
o t h t e A C p o w r e s w c t i . h
u e r h t t a h t e e r s i p o r p r e A C p o w r e
®
LED lights. Multiple IntelliBrite
®

Controller

(Continued)
Saved color effect
is displayed.
Saved color effect
is displayed.
t e f i n e c e s s a . y r
e u j n t c o i n b x o t a h t e p o o s l d i e
a p p e i l d o t h t e g i l h . t
® Controller
(sold separately)
® ®
IntelliBrite underwater LED (light-emitting
®
LED lights can be connected via a
® Controller:
®
IntelliBrite Controller
[P/N 600054]