Pentair MAGICSTREAM LAMINAR Installation And User Manual page 26

24
2. Make sure the spare o-rings are in place. Place the union winterization
plugs in the laminar adjustment nuts and screw them in place on the laminar
body (Figure 5).
3. Connect the laminar to the supply pipe with the union connection (Figure 5).
Make sure the o-ring stays in its groove.
4. Adjust the laminar so that the laminar orifice is visible through the slot in the
deck housing lid.
5. Place the deck housing lid/laminar unit in the deck housing (Figure 5). If the
hoses in the deck housing prevent the proper seating of the deck housing lid,
you may have to loosen the union nut briefly and allow the hoses to twist, so
that they spiral out of the way, into the deck housing.
6. Adjust the laminar throttling valve to ¼ open. Turn on the supply pump and
let the laminar fill with water.
7. When a stream of water begins to flow from the laminar orifice, adjust the
flow, elevation and direction as desired.
D eck housing cover
Laminar unit
D eck housing
Figure 5.
MAGICSTREAM ® Laminar Installation and User's Guide
Spare
O-ring
O-ring
Laminar
adjustment
nut
Union winteriz ation
plug
Union connection