Table Of Contents - Pentair MAGICSTREAM LAMINAR Installation And User Manual

Technical Support
Phone: (800) 831-7133 - Fax: (800) 284-4151
Web sites: www.pentairpool.com and www.staritepool.com:
IMPORTANT WARNING AND SAFETY INSTRUCTIONS................................ 1
Introduction ..................................................................................................... 3
MagicStream Laminars Overview .................................................................... 4
Operating Modes (Standard and IntelliBrite) ..................................................
Using an External Transformer for Multiple 12VAC Laminars .......................... 5
Operating MagicStream Laminars Using A Wall Switch .................................. 6
Selecting Color Show Mode or a Fixed Color Using a Wall Switch ................. 6
Operating MagicStream Laminars In Standard Mode ...................................... 8
Selecting Show Mode or a Fixed Color Using an IntelliBrite Controller
Installing MagicStream Laminar (new pool construction) ................................. 11
Replacing MagicStream Laminar Assembly (in an existing pool and spa) ....... 14
Connecting MagicStream Laminars to an Automation Control System ............ 16
Setting Up MagicStream Laminars with an Automation Control System .......... 18
Connecting MagicStream Laminars to an IntelliBrite Controller ...................... 21
MagicStream Laminar Setup and Operation ................................................ 23
Light Enhancer Adjustment ........................................................................... 25
Maintenance and Troubleshooting ................................................................... 26
Winterization ................................................................................................... 28
MagicStream Laminar Parts List ...................................................................... 29
MagicStream Laminar Dimensions .................................................................. 30
IMPORTANT LAMINAR INSTALLATION INFORMATION: In an effort to stay in
compliance with the latest updates for the UL 676 standard, regarding dead metal
parts for wet niche luminaires (UL 676, Clause 21.1); The Laminar Jet units will no
longer be shipped with the ground connector or the internal ground strap.
Laminar Jet is a low voltage light with no ground wire, which according with th
mentioned updated UL 676 standard, should not have any dead metal part. This
will be a running change, starting on units shipped on or after February 2012.
READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL.
P/N 590033 Rev D - 6/3/13
MAGICSTREAM ® Laminar Installation and User's Guide
Contents
4
........... 10