Using An External Transformer For Multiple 12Vac Laminars - Pentair MAGICSTREAM LAMINAR Installation And User Manual

Using an External Transformer for Multiple 12 VAC MagicStream
Laminars
When using a 100 Watt transformer (set at 12 VAC) with multiple 12 VAC MagicStream
Laminars, it is recommended that no more than six (6) MagicStream laminars be used
with a maximum of 50 feet 12 gauge cable run, between the transformer and the junction
box. There should be no more than 100 feet of cable between the junction box and the
MagicStream laminar. This will ensure that the MagicStream laminars receive a minimum
operating power of 12 VAC. Note: For long cable lengths, set transformer to 14 VAC, see
diagram below.
100 Watt
Transformer
Maximum wattage when using multiple MagicStream
Color LED lights (using a 300 Watt Transformer)
Note: A maximum of 14 laminars can be put on one 300 Watt Transformer
IMPORTANT! When using multiple 12 VAC Pentair
allowable light wattage is 300 Watts maximum. The individual light wattage is as follows:
12 Gauge
J Box
(Minimum)
150 ft.
Laminar is 16 Watts maximum
® Shallow Water LED Light is 23 Watts maximum
® Laminars and IntelliBrite
® LED color pool and spa lights the total
MAGICSTREAM ® Laminar Installation and User's Guide
5
®
®
®