Advertisement
5.2 Connecting to Power Source
5.2.1 Electrical connection must be made by a licensed electrician
5.2.2
The power outlet socket on the machine should be available.
5.2.3 Plug the machine to a grounded socket.
5.2.4 Mains voltage of the machine is optional as 230 V 50 Hz or 400 V 50 Hz.
5.2.5
5.2.6
After electrical connection is made, machine must be operated in idle running and it must be controlled
whether rotation directions of cutting tools are correct or not and if the rotation direction is wrong, appropriate
connection must be made.
6. MACHINE'S SAFETY INFORMATION
6.1 Lifting, installation, electric maintenance of the machine should be carried out by qualified personnel only.
6.2 Routine maintenance and scheduled maintenance should be carried out by qualified personnel after unplugging the
machine first.
6.3 Ensure that the machine has been cleaned, tested and maintained before starting to operate it.
6.4 Check the safety devices, power cable and moving parts regularly. Don't operate the machine before having replaced
defective safety devices or faulty parts.
6.5 Never replace the cutting tools before unplugging first.
Check the supply voltage. The source voltage must be in accordance with the data
on the machine's label.
44
Advertisement
