Omron SYSMAC CS Series Programming Manual page 286

PC Comparison Charts PC Comparison Charts
Item
Table Data SET STACK
Processing
Instructions
PUSH ONTO
STACK:
FIRST IN
FIRST OUT
LAST IN
FIRST OUT
FIND MAXI-
MUM/FIND
MINIMUM
DATA
SEARCH
FRAME
CHECKSUM
SUM
SWAP BYTES SWAP
DIMENSION
RECORD
TABLE:
SET
RECORD
LOCATION
GET
RECORD
LOCATION
Data Con- SCALING
trol Instruc-
SCALING 2
tions
SCALING 3
PID CON-
TROL
LIMIT CON-
TROL
DEAD BAND
CONTROL
DEAD ZONE
CONTROL
AVERAGE
Mne- CJ Series
monic
SSET Yes (Four words Yes (Four words
of stack control of stack control
information. information.
Number of words Number of words
specified in specified in
binary: 5 to binary: 5 to
65535) 65535)
PUSH Yes Yes
FIFO Yes Yes
LIFO Yes Yes
MAX, Yes (Two words Yes (Two words
MIN in control data in control data
field. Table length field. Table length
specified in specified in
binary: 1 to binary: 1 to
FFFF) FFFF)
SRCH Yes (Table length Yes (Table length
specified in specified in
binary: 1 to binary: 1 to
FFFF. PC mem- FFFF. PC mem-
ory address out- ory address out-
put to IR0. put to IR0.
Number of Number of
matches can be matches can be
output to DR0) output to DR0)
FCS Yes Yes
SUM Yes (Same as Yes (Same as
C200HX/HG/HE: C200HX/HG/HE:
Sum possible for Sum possible for
bytes as well as bytes as well as
words.) words.)
Yes (Can be Yes (Can be
used for data used for data
communications communications
and other appli- and other appli-
cations.) cations.)
DIM Yes Yes
SETR Yes Yes
GETR Yes Yes
SCL Yes Yes
SCL2 Yes Yes
SCL3 Yes Yes
PID Yes (Output can Yes (Output can
be switched be switched
between 0% and between 0% and
50% when PV = 50% when PV =
SV. PID and SV. PID and
sampling period sampling period
specified in specified in
binary.) binary.)
LMT Yes Yes
BAND Yes Yes
ZONE Yes Yes
AVG Yes (Number of Yes (Number of
scans specified in scans specified in
binary) binary)
CS Series C200HX/HG/HE
No
No
No
No
Yes (One word in
control data field.
Table length
specified in BCD:
1 to 999)
Yes (Table length
specified in BCD:
1 to 6556. PC
memory address
output to C+1.
Number of
matches cannot
be output to DR0)
Yes
Yes (Sum possi-
ble for bytes as
well as words.)
No
No
No
No
Yes
No
No
Yes (PID and
sampling period
specified in BCD)
No
No
No
Yes (Number of
scans specified in
BCD)
Appendix A Appendix A
CVM1/CV Series CQM1H
Yes (Four words No
of stack control
information.
Number of words
specified in BCD:
3 to 9999)
Yes No
Yes No
Yes No
Yes (One word in Yes (One word in
control data field. control data field.
Table length Table length
specified in BCD: specified in BCD:
1 to 999) 1 to 999)
Yes (Table length Yes (Table length
specified in BCD: specified in BCD:
1 to 9999. PC 1 to 6556. PC
memory address memory address
output to IR0. output to C+1.
Number of Number of
matches cannot matches cannot
be output to DR0) be output to DR0)
No Yes
Yes (Sum possi- Yes (Sum possi-
ble for words ble for bytes as
only.) well as words.)
No No
No No
No No
No No
No Yes
No Yes
No Yes
Yes (PID and Yes (PID and
sampling period sampling period
specified in BCD) specified in BCD)
(*1)
Yes (*1) No
Yes (*1) No
Yes (*1) No
No Yes (Number of
scans specified in
BCD)
267