Advertisement
Step 14
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D20 and D21).
å
Fasten the DRAWER RIGHT (40CC) and DRAWER LEFT (40CD)
å
to the DRAWER SIDES (D20 and D21). Use four GOLD 5/16" FLAT
HEAD SCREWS (3S) through holes #2 and #4.
NOTE: The screw head in the CAM must be visible through the
å
slotted hole in the SLIDE.
4 3
Roller end
1
10A
2
D21
3S
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
Screw head - turn the CAM
to line up holes in SLIDES
with holes in DRAWER SIDES.
10A
D20
3
4
Roller end
1
2
Page 19
Advertisement
