Related Manuals for Teknik 5412885
Summary of Contents for Teknik 5412885
- Page 1 Teknik www.teknikoffice.co.uk Something to write home about. Writing Table Cinnamon Cherry | Model 5412885...
- Page 2 Table of Contents Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 5-15 Français 16-18 Skip the power trip. This time. Español 19-21 Safety Warranty Page 2...
- Page 3 Now you know Part Identifi cation our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. END (2) DRAWER BOTTOM (1) BACK (1)
- Page 4 Hardware Identifi cation å Screws are shown actual size. You may receive extra hardware with your unit. CAM COVER SCREW COVER HIDDEN CAM - 13 CAM SCREW - 13 WOOD DOWEL - 20 CARD - 1 CARD - 1 PULL - 1 RIGHT CABINET RAIL - 1 LEFT CABINET RAIL - 1 RIGHT DRAWER SLIDE - 1...
- Page 5 Step 1 Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. Turn thirteen CAM SCREWS (2) into the TOP (D). å (13 used) Page 5...
- Page 6 Step 2 Insert twenty WOOD DOWELS (3) into the holes in the å edges of the ENDS (A), UPRIGHTS (B and C), BACK (J), FRONTS (K and L), and STRETCHERS (M). (20 used) Page 6...
- Page 7 Step 3 Fasten the ENDS (A) to the BACK (J). Use two BLACK 2" FLAT å HEAD SCREWS (11). Fasten the FRONTS (K and L) to the ENDS (A). Use two BLACK å 2" FLAT HEAD SCREWS (11). Fasten the UPRIGHTS (B and C) to the BACK (J) and FRONTS (K å...
- Page 8 Step 4 Push thirteen HIDDEN CAMS (1) into the ENDS (A), å UPRIGHTS (B and C), BACK (J) and FRONTS (K and L). Fasten the ENDS (A), UPRIGHTS (B and C), BACK (J) å and FRONTS (K and L) to the TOP (D). Tighten thirteen HIDDEN CAMS.
- Page 9 Step 5 Fasten the RIGHT CABINET RAIL (17) to the RIGHT å UPRIGHT (B) and the LEFT CABINET RAIL (18) to the LEFT UPRIGHT (C). Use eight BLACK 1/2" FLAT HEAD SCREWS (16) through the exact holes shown below. BLACK 1/2" FLAT HEAD SCREW (8 used in this step) Use this hole.
- Page 10 Step 6 Fasten two LEGS (N and O) to the ENDS (A). Use two å BLACK 2" FLAT HEAD SCREWS (11). NOTE: Be sure the WOOD DOWELS in the ENDS insert å into the holes in the LEGS. Fasten the BACK (J) to the LEGS (N and O). Use six å...
- Page 11 Step 7 Fasten the STRETCHERS (M) to the LEGS (N and O). å Use two BLACK 2" FLAT HEAD SCREWS (11). NOTE: Be sure the WOOD DOWELS in the å STRETCHERS insert into the holes in the LEGS. Fasten the remaining LEGS (N and O) to the ENDS (A) å...
- Page 12 Step 8 Fasten the DRAWER SIDES (F and G) to the DRAWER å BACK (H) as shown in the upper diagram. Use two BLACK 1-1/2" FLAT HEAD SCREWS (12). Slide the DRAWER BOTTOM (I) into the grooves in the å DRAWER SIDES (F and G) and DRAWER BACK (H) as shown in the lower diagram.
- Page 13 Step 9 Fasten the PULL (6) to the DRAWER FRONT (P) as shown in the upper diagram. Use two BLACK 3/4" MACHINE å SCREWS (15) through the DRAWER FRONT and into the PULL. Fasten the DRAWER BOX FRONT (E) to the DRAWER SIDES (F and G) as shown in the lower diagram. Use two BLACK å...
- Page 14 Step 10 Carefully turn your drawer over onto its top edges. å Fasten the RIGHT DRAWER SLIDE (19) to the RIGHT å DRAWER SIDE (F) and the LEFT DRAWER SLIDE (20) to the LEFT DRAWER SIDE (G). Use six BLACK 1/2" FLAT HEAD SCREWS (16).
- Page 15 Step 11 Carefully stand your unit upright. å To insert the drawer into your unit, tip the front of the drawer down and drop the rollers on the drawer behind the å rollers on the unit. Lift the front of the drawer up and slide it into the unit. Peel the COVERS from the CAM COVER CARD (4) and stick one onto each visible HIDDEN CAM.
- Page 16 WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded drawers or shelves. •...