Using A Mobile Phone - SMART fortwo coupe Owner's Manual

Using a mobile phone

120
Calling up the detailed consumption
display
X
Menu
Select >
Consumption
Consumption details
The
energy consumption of the drive and elec-
trical consumers as well as the energy recu-
perated during the previous 15 minutes. The
display also shows the total consumption of
the drive and electrical consumers as well as
the total amount of energy recuperated dur-
ing the current journey.
Consumption details
The
each time the engine is switched on.
Using a mobile phone
Connecting a mobile phone
Please note
G
WARNING
The electromagnetic radiation from two-
way radios can interfere with the vehicle
electronics if they are manipulated or ret-
rofitted incorrectly. This could jeopardise
the operating safety of the vehicle. There is
a risk of an accident.
You should have all work on electrical and
electronic components carried out at a
qualified specialist workshop.
G
WARNING
If you operate two-way radios incorrectly
in the vehicle, their electromagnetic radi-
ation can interfere with the vehicle elec-
tronics, for example if:
the two-way radio is not connected to an
R
exterior aerial
the exterior aerial is not correctly moun-
R
ted or is not low-reflection
This could jeopardise the operating safety
of the vehicle. There is a risk of an accident.
Have the low-reflection exterior aerial fit-
ted at a qualified specialist workshop.
When operating two-way radios in the
Vehicle electric drive
>
details.
display shows the
display is reset
vehicle, always connect them to the low-
reflection exterior aerial.
>
®
Bluetooth must be enabled both on the
mobile phone and on the smart Media-Sys-
tem.
Enabling and disabling Bluetooth
The mobile phone must be compatible with
the smart Media-System.
Overview of compatible mobile phones:
https://www.smart.com/connect.
X
Settings
Select
The setting is marked. Bluetooth
bled or disabled on the smart Media-Sys-
tem.
Authorising a mobile phone
Authorising a mobile phone for the first
time
®
Bluetooth must be enabled on the smart
Media-System.
X
Telephone
Select the
X
Confirm the display message with Yes.
X
Enter the security code on the mobile
phone or accept access confirmation (see
manufacturer's operating instructions).
Bluetooth is enabled
The message
shown.
Authorising another mobile phone
®
Bluetooth must be enabled on the smart
Media-System.
X
Settings
Select
The list of visible mobile phones is dis-
played.
X
Select a mobile phone from the list.
X
Enter the security code on the mobile
phone or accept access confirmation (see
manufacturer's operating instructions).
®
The Bluetooth
®
The Bluetooth
lished automatically in future.
®
Enable Bluetooth.
>
®
is ena-
menu.
Manage devices.
>
connection is established.
connection will be estab-
is