Usb; Usb Port; Mobile Phone Wireless Charging; Notes On Wireless Charging - SMART #1 2023 User Manual

70 Seats and stowage
Lift up the cover
connector.
Using the 12 V power supply
Requirements:
● The 12 V power supply can power elec-
tronic equipment, such as the electric
air pump in the tyre repair kit.
● Do not use electrical equipment with
ratings more than 12 V or 120 W.
● Never insert fingers or foreign objects,
such as pens, into the power supply.
● Never touch the power supply with wet
hands, or you may get electric shock.
● When not in use, cover the power
supply.
● Never touch the socket with water or
any other liquid.

USB

USB port

NOTE
The output voltage is 5 V (up to 9 V
under fast charge), and the maximum
output current is about 3 A.
The USB ports are in the storage area be-
low the centre display.
and insert the device
It is a special port for charging, which
can provide up to 18 W fast charge (for
mobile phones and tablets).
Connect with infotainment system for
data transmission and mobile phone
mapping.
Only used for charging mobile devices,
such as mobile phones and tablets.

Mobile phone wireless charging

Notes on wireless charging

NOTE Damage due to wireless
charging
► Make sure that metal objects are far
away from the charging board. Metal
objects may overheat the charging
board, and even cause accidents.
► Make sure that credit cards or other
magnetic objects are far away from
the charging board to avoid mag-
netic information being erased.
Pay attention to the following when
charging wirelessly:
● The wireless charging function only
supports mobile phones, headphones,
stereos and other devices that meet
the wireless charging protocol.