Block Diagram; Specifications - Laird CF10G Hardware Integration Manual

SDC-CF10G
Hardware Integration Guide
B D
LOCK IAGRAM
S
PECIFICATIONS
Feature
System Interface
Antenna Interface
Chip Set
Input Voltage Requirements
Current Consumption
(At maximum transmit power setting)
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Maximum Electrostatic Discharge
Length
Width
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
Description
16-bit Compact Flash Type I with 50-pin connector
Note: This card is not designed for operation in the CF slot
on standard laptop and desktop PCs. For these devices,
Summit suggests using the SDC-PC20G in the PC Card
(PCMCIA) or CardBus slot found on most laptops and
desktops.
2 Hirose U.FL connectors for dual band antenna diversity
Broadcom BCM4318E
3.3 VDC +/- 10%
Transmit: 440mA (1320mW)
Receive: 180mA (594mW)
Standby: 10mA (33mW)
-30° to 75°C (-22° to 167°F)
10 to 90% (non-condensing)
-40° to 80°C (-40° to 176°F)
10 to 90% (non-condensing)
4 kV
54.5 mm (2.15 in.)
43 mm (1.69 in.)
5 Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610