Table of Contents
Advertisement
Exit Menu
If you want to setup exit procedures, choose Exit
Menu. There are Exit Saving Changes, Exit
Discarding Changes, Load Setup Defaults, Discard
Changes, and Save Changes.
Save Settings
Select this parameter, there will be another sub-menu
asking you to confirm saving configuration changes.
The default value is Yes. If Yes, all the changes
made before will be saved.
Restore Settings
Select this parameter, there will be another sub-menu
asking you to confirm loading previous configuration.
The default value is Yes. If Yes, all the changes made
before will be undone.
Load Default Settings
The computer is already configured for use. The
original configuration settings, also called factory or
default settings, are stored in the CMOS. Setup
includes an option Load Setup Defaults that lets you
reload the original configuration at any time.
To load the default settings, follow these steps:
1. Use down-arrow key to select Load Setup Defaults
in Exit Menu. A dialog box appears confirming if
you want to load the default settings.
2. Use the left-arrow key to select Yes, then press
Enter.
3. Press Esc to exit Setup.
A dialog box appears confirming if you want to
save the settings (in this case, the default settings
that you reloaded).
4. Use the left-arrow key to select Yes, then press
Enter to exit.
You must load the Setup default settings in the
following instances:
•
When you replace the system battery.
•
When you customize the system configuration
settings and some resource assignments conflict
causing the computer to stop responding.
General Information 29
Advertisement
Table of Contents
