Cover
•
Press the two blue latches inward and lift up the
cover.
•
Touch the bare metal frame of the system to
dissipate any static electricity from your body (do
not touch any of the components inside the frame
until you have done this). Do not touch any
component(s) with a voltage warning label.
NOTE: Replacing the Cover
•
To replace the cover, pressing in on the sides so
the hooks inside the cover fit over the ledge of the
cover. Slide the cover forward into place. Cover is
secured when the two blue latches hooked with
the system firmly. You hear a crispy clip when it's
secured.
CAUTION: When you replace the cover, there are
hooks inside the cover that help fit it to the
tower.
92
IBM Desktop System HMM