System Backup Battery - IBM 2283 Hardware Maintenance Service

System Backup Battery

CAUTION: All BIOS configuration settings will be lost
when the backup battery is removed!
ATTENTION: Be careful when removing the backup
battery. If the metal lever is damaged or
broken, the system board must be replaced.
•
Gently pull the metal lever away from the backup
battery.
•
Lift the backup battery out.
IMPORTANT: Make sure to insert the battery with the
positive side facing up. A plus(+) sign indicates
the positive side.
•
If you replace the system battery, you need to
reset the system date and time. You can perform
this task from the Window 2000, NT, XP desktop or
from the Configuration/Setup Utility. To reset the
system date and time in the Configuration/Setup
Utility, select the Main Menu.
102 IBM Desktop System HMM