Set Configuration Menu - IBM PC/2 25 Hardware Maintenance Reference

Diagnostics for non micro channel

Table of Contents

5.4.1 Set Configuration Menu

This menu allows you to view or change the current system configuration:

+----------------------------------------------------------------------------------+

¦ SET CONFIGURATION MENU

1 - VIEW CONFIGURATION

2 - CHANGE CONFIGURATION

3 - BACKUP CONFIGURATION

4 - RESTORE CONFIGURATION

5 - RUN AUTOMATIC CONFIGURATION

+----------------------------------------------------------------------------------+

1 - VIEW CONFIGURATION:

2 - CHANGE CONFIGURATION:

Note:

Only those items enclosed in brackets can be changed by using the

F5 and F6 keys.

3 - BACKUP CONFIGURATION:

fixed disk.

4 - RESTORE CONFIGURATION:

created with Backup configuration.

5 - RUN AUTOMATIC CONFIGURATION:

and to what the system determines is installed.

Note:

If the configuration is changed during service, refer the customer

to the Guide to Operations to restore the system configuration to

the original configuration.

HMR Diagnostics for Non Micro Channel

Set Configuration Menu

Shows the current system configuration.

Allows the current configuration to be changed.

Saves the system configuration to a diskette or

Sets the system configuration from data

Sets the configuration to default values

5.4.1 - 1

Table of Contents

Pc/2 30