Chapter 12: Common Procedures Using Edm; Saving The Configuration - Avaya 8800 Commissioning Manual

Chapter 12: Common procedures using
The following section describes common procedures you use while commissioning the Avaya Ethernet
Routing Switch 8800/8600.
Common procedure navigation

Saving the configuration

Saving the configuration
After you change the boot configuration, you must save the changes to both the master and
the standby management modules. Save the configuration to a file to retain the configuration
settings.
Procedure steps
1. In the navigation tree, open the following folders: Configuration > Edit.
2. Click Chassis.
3. Scroll down to the ActionGroup1 section and select saveBootConfig to save the
4. Click Apply.
5. Select saveRuntimeConfig to save the current configuration.
6. Click Apply.
Commissioning
EDM
on page 107
The Chassis dialog box appears with the System tab displayed.
boot configuration.
June 2011 107