Configuring The Time Zone - Avaya 8800 Commissioning Manual

log
name <word>
notify-filter
sender-ip
user
view
Example of configuring system identification
Procedure steps
1. Change the system name by using the following command:
2. Configure the system location by using the following command:

Configuring the time zone

Configure the time zone to specify the time zone for your location and configure settings for
Daylight Saving Time (DST).
Commissioning
Variable
ERS-8610:5(config)# sys name ERS-8610
ERS-8610:5(config)# snmp-server location "12 Main St,
Vancouver, BC"
Value
configure this option to the default value, use the
default operator with the command. The default is
an Avaya address.
Specifies the SNMP log feature.
Configures the system or root level prompt name
for the switch. word is an ASCII string from 1 to
255 characters (for example, LabSC7 or
Closet4).
Creates new entry for notify filter table.
Sets SNMP trap sender IP.
Creates or modifies SNMPv3 user.
Creates or modifies an SNMP access view.
Configuring the time zone
June 2011 65