Avaya 8800 Commissioning Manual page 41

Variable definitions
Use the data in the following table to use the config sys set command.
clipId-topology-ip <id>
clock-sync-time <minutes>
contact <contact>
dot1d-tp-fdb-query <enable|disable>
ecn-compatibility <enable|disable>
force-topology-ip-flag <true|false>
global-filter <enable|disable>
info
location <location>
max-vlan-resource-reservation <enable|
disable>
mgmt-virtual-ip <ipaddr/mask>
mgmt-virtual-ipv6 <ipv6addr/prefix-len>
mroute-stream-limit <enable|disable>
Commissioning
config sys set location <location>
Variable
Configuring system identification
Value
Sets the topology IP from the available
CLIP. id is the Circuitless IP interface id in
the range of 1 to 256.
Configures the RTC-to-system clock
synchronization time. minutes is the RTC-
to-System clock synchronization time in
minutes in the range of 15 to 3600.
Alters the system contact.contact is the
system contact. The string length is in the
range of 0 to 255.
Enables or disables the dot1d-tp-fdb-query
feature.
Enables or disables ecn-compatibility
feature.
Sets flag to force choice of topology-IP. true|
false enables or disables Force Topology IP
Flag.
Enables global filter feature.
Shows current level parameter settings and
next level directories.
Changes the system location.
Enables MAX-VLAN feature.
Configures mgmt virtual IP. ipaddr/mask is
the IP address and network mask {a.b.c.d/
x | a.b.c.d/x.x.x.x | default}.
Configures mgmt virtual IPV6. ipv6addr/
prefix-len is the IPV6 address. The string
length ranges from 0 to 46.
Global mroute stream limit
configuration.enable|disable enables or
disables mroute stream limit.
June 2011 41