Avaya 8800 Commissioning Manual page 61
Ethernet routing switch
Hide thumbs
Also See for 8800:
- Troubleshooting manual (484 pages) ,
- Planning and engineering, network design (327 pages) ,
- Planning and engineering (306 pages)
Table of Contents
Advertisement
Please provide primary image-file
path [/flash/p80a4100.img]:
Please add system prompt
[ERS-8606]:
Please select CPU primary slot (5/6)
[5]:
Primary CPU mgmt port:
autonegotiation [n] (y/n)?
speed (10/100) [10]:
Do you want to enable automatic
savetostandby mode [n] (y/n)?
Do you want to enable enhanced
operation mode support [n] (y/n)?
Do you want to enable CPU High
Availability mode [n] (y/n)?
Commissioning
Prompt
Configuring the switch with the setup utility
Description and action
Description: Indicates the name of the primary image
file.
Action: Press
Enter
to accept the default
(p80a4100.img), or type a different file name for the
primary image file. To specify the path to the file is
optional. If your run-time image resides on your
external flash (8895 SF/CPU) or PCMCIA card (8692
SF/CPU), you must specify the path as /PCMCIA/ file
name.
Description: Specifies the text for the prompt.
Action: Press
Enter
to accept the default
(ERS-8610), or type a different string of up to 20
characters.
Description: Indicates the slot number of the primary
central processing unit (CPU). The slot can be 5 or
6.
Action: Press
Enter
to accept the default (5), or
specify 6.
Description: Specifies if you want the primary CPU to
use autonegotiation.
n
Action: Enter
to accept the default, or enter
indicate that you want the primary CPU management
port to use autonegotiation.
Description: Specifies the line speed in Mb/s.
Action: Press
Enter
to accept the default (10 Mb/s),
or specify 100 Mb/s.
Description: Specifies if you want the boot and run-
time configuration files to be saved on the backup
CPU.
Action: Enter
y
to save the boot and run-time
configuration files on the backup CPU. Accept the
default (
n
) to save boot and run-time configuration
files on the primary CPU.
Description: Specifies if you want to enable enhanced
operation mode. Enhanced operation mode
increases the maximum number of VLANs when you
use MultiLink Trunking (MLT) (1980) and Split MLT
(SMLT) (989).
Action: Enter
y
to enable enhanced operation mode.
n
Accept the default (
), to disable enhanced operation
mode.
Description: Specifies if you want to enable CPU high
availability (HA) mode. Use CPU HA mode to recover
switches with two CPUs quickly from a failure of one
of the CPUs. In HA mode (hot standby), you
y
to
June 2011
61
Advertisement
Table of Contents
