Avaya 8800 Commissioning Manual page 74

Initial steps using EDM
VirtualIPv6Prefix Length
DnsDomainName
LastChange
LastVlanChange
LastStatisticsReset
LastRunTimeConfigSave
LastRunTimeConfigSaveToSlave
LastBootConfigSave
LastBootConfigSaveOnSlave
DefaultRuntimeConfigFileName
DefaultBootConfigFileName
ConfigFileName
ActionGroup1
ActionGroup2
ActionGroup3
74 Commissioning
Variable Value
Configures the length of the virtual IPv6 prefix
entry
Configures the default domain for querying the
DNS server
Displays the time since the last configuration
change
Displays the time since the last VLAN change
Displays the time since the statistics counters
were last reset
Displays the last run-time configuration saved
Displays the last run-time configuration saved to
the standby device
Displays the last boot configuration saved
Displays the last boot configuration saved on the
standby device
Displays the default run-time configuration file
directory name
Displays the default boot configuration file
directory name
Specifies the name of a new configuration file
Can be one of the following actions:
• resetCounters—resets all statistic counters
• saveRuntimeConfig—saves the current run-
time configuration
• saveRuntimeConfigToSlave—saves the
current run-time configuration to the standby
SF/CPU
• saveBootConfig—saves the current boot
configuration
• saveSlaveBootConfig—saves the current boot
configuration to the standby SF/CPU
• loadLicense—loads a software license file to
enable features
resetlstStatCounters—resets the IST statistic
counters
flushIpRouteTbl—flushes IP routes from the
routing table
June 2011