Salus ST100ZB Manual page 7

Section 2
Table 2.2: Display Icons
Cooling (Animated when cooling is on)
Auto Heat/Cool Changeover
ON – Indicates Constant Fan Enabled
3 Dots – High Speed
AUTO – Automatic Fan Speed
Fixed Fan Speed – Low
Device connected to local network
Test Mode (Special Code 22)
Battery Low (ST103 Wireless Remote Only)
Accessory Output On (Humidifier, Dehumidifier, ERV or HRV)
External Sensor Indication (wired or wireless)
Day of the week (Mon = 1, Tue = 2, Wed = 3, Thu = 4, Fri = 5, Sat = 6, Sun = 7)
Schedule Interval (1-6) - Specifies time interval
of scheduled temperature changes
Setback Indicator – Setback input is activated
Pipe temperature reading shown
Module 5 – Connected Fan Coil Controls
Keypad & Display – Fan Coil Controls
Heat/Cool/Off Modes
Fixed Fan Speed – Medium
Wireless/Internet Indications
Test/Key Lock/Battery/Filter
Internal/External Temperature Sensor
Schedule Indications
Multifunction Temperature Indication
Heating (Animated when heat is on)
Off
Fan Modes
– Constant Fan Disabled
1 Dot – Low Speed
AUTO – Automatic Fan Speed
Device connected to SALUS Smart Home Service
Keys Locked Mode
Change Filter (Timer expired)
Internal Sensor Indication (Only visible in TEST Mode)
Schedule Indicator – When shown, the Thermostat is
following a schedule
AWAY State Indicator – Displayed when the Fan Coil
Thermostat is set to AWAY, using setback temperatures
Setpoint temperature reading shown
Fixed Fan Speed – High
2-2