Salus ST100ZB Manual page 29

Section 7
Program Mode
Weekly
5+2
Weekdays/Weekend
(Default)
Daily
Module 5 – Connected Fan Coil Controls
Device Configuration – Fan Coil Controls
Year: To set the year, use the
Press SELECT to choose the value displayed and move to the next setting .
Note: This setting is available in standalone or local mode only.
Note: Schedule parameters are only available in standalone or local mode . If the Fan Coil Thermostat
is connected to the SALUS Smart Home application, the schedule must be programmed on your PC or
smart device .
Schedule: While Prog is displayed, press the
See the following table that describes which days are programmed based on the display .
After selecting the day group, press SELECT to move to setting temperatures for each interval during
the day .
Day Group Displayed
Time: To set the time, use the
value, then press SELECT to choose the value displayed and select minutes .
With the minute value flashing, use the
Press SELECT to choose the value displayed and move to the next setting .
Note: This setting is available in standalone or local mode only.
Date: To set the date, use the
value, then press SELECT to choose the value displayed and select date .
With the date value flashing, use the
Press SELECT to choose the value displayed and move to the next setting .
Note: This setting is available in standalone or local mode only.
or keys to change the flashing year value .
or
or keys to change the flashing hour
or keys to change the value .
or keys to change the flashing month
or keys to change the value .
keys to change the day group to be edited .
Schedule Description
Every day of the week
Monday through Friday
Saturday and Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
7-2