Features - Fujitsu RAID 0/1 SAS based on LSI MegaRAID User Manual

Modular RAID 6Gb/s (SAS2.0)
4.5.1

Features

Industry-proven MegaRAID
●
Flexibility for both SAS 2.0 and SATA II / SATA III
●
Advanced management and configuration suites
●
12V PCIe RAID HDD module
●
Supports RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60
●
Optional RAID controller FBU
●
Offers advanced MegaRAID functionality to integrated LSI SAS
●
8-lane 5.0 / 8.0 Gbit PCIe host bus
●
6 SAS/SATA ports, (2+2 ports for Storage Blade Connection and 2 ports for
●
Blade internal HDD Connection)
Each SAS/SATA port supports SSP, SMP and STP
●
Support for the following STP features:
●
– Addressing of SATA targets through expander
– Native Command Queuing (NCQ)
Support of the following SSP features:
●
– Wide port functionality (2x2 Phys from a single quad port)
– Narrow port functionality (1 Phy)
– Compatible with SATA target devices
Hot-plug drives
●
SGPIO interfaces for signaling of SAS/SATA ports
●
Hardware XOR for RAID parity calculations
●
72-bit wide 512 MB of 1333MHz DDR3 SDRAM (with ECC)
●
64
®
data protection
Modular RAID Controllers