Important Information; Safety Instructions - Fujitsu RAID 0/1 SAS based on LSI MegaRAID User Manual

2

Important information

In this chapter you will find essential information regarding safety when working
with the board. Please read the instructions carefully if you want to
install/remove a board.
V
CAUTION!
Observe the safety notes in the Operating Manual of your system unit.
2.1

Safety instructions

V
CAUTION!
The actions described in these instructions should only be performed
●
by authorized, qualified personnel. Equipment repairs should only be
performed by qualified staff. Any failure to observe the guidelines in
this manual, and any unauthorized openings and improper repairs
could expose the user to risks (electric shock, fire hazards) and could
also damage the equipment. Please note that any unauthorized
openings of the device will result in the invalidation of the warranty
and exclusion from all liability.
Transport the device only in the antistatic original packaging or in
●
packaging that protects it from knocks and jolts.
Only install extensions that have been released. If you install other
●
extensions, you may interfere with the requirements and rules
governing safety and electromagnetic compatibility of your system.
Information on which system extensions are suitable can be obtained
from the customer service center or your sales outlet.
The warranty becomes invalid if the device is damaged during the
●
installation or replacement of system extensions.
Components can become very hot during operation. To avoid burns,
●
make sure you do not touch components when adding or removing
system board extensions!
Transmisson cables to peripheral devices must be adequately
●
shielded.
Modular RAID Controllers
9