Installation - Fujitsu RAID 0/1 SAS based on LSI MegaRAID User Manual

Modular RAID 12Gb/s (SAS3.0)
Connectors
Connector Type
SAS MLC1 x4 SAS, ports 0- 3
SAS MLC2 x4 SAS, ports 4- 7
HDD activity
HDD LED
indication LED
FBU 1-6
Indicators
LED
L1 (green blinking)
5.1.4

Installation

This section describes how to install the SAS RAID controller in a server.
V
CAUTION!
To safeguard against data loss, remember to back up your data before
you change your system configuration.
To install the new controller, proceed as follows:
Step 1 Unpack the controller
Unpack the new controller in a static-free environment. Remove
it from the anti-static bag and inspect it for damage.
If the controller appears to be damaged, contact the Fujitsu
support service.
Step 2 Prepare the server
Turn off the server and remove the cover from the chassis.
78
Description
SFF 8643 Mini SAS HD 4i connector for SAS
IO cable to backplane and HDDs
SFF 8643 Mini SAS HD 4i connector for SAS
IO cable to backplane and HDDs
6-pin connector
Pin 4 to connect activity LED
Connector on TFM to attach FBU
Description
Heart Beat
Modular RAID Controllers