Features; Controller Versions - Fujitsu RAID 0/1 SAS based on LSI MegaRAID User Manual

Modular RAID 6Gb/s (SAS2.0)
4.3.1

Features

Industry-proven MegaRAID
●
Flexibility for both SAS 2.0 and SATA II
●
Advanced management and configuration suites
●
Supports RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60
●
Optionally secured with BBU
●
Offers advanced MegaRAID functionality to integrated LSI SAS
●
12 V PCIe add-in card
●
8-lane 5.0 Gbit PCIe host bus
●
8 SAS/SATA ports
●
Each SAS/SATA port supports SSP, SMP and STP
●
Support for the following STP features:
●
– Addressing of SATA targets through expander
– Native Command Queuing (NCQ)
Support of the following SSP features:
●
– Wide port functionality (2 or 4 Phys from a single quad port)
– Narrow port functionality (1 Phy)
– Compatible with SATA target devices
2 x SATA connectors for internal hard disk drives, 1 x SAS lane each
●
1 x Midplane connector, 4 x SAS lanes
●
Hot-plug drives
●
SGPIO interfaces for signaling of SAS/SATA ports
●
Hardware XOR for RAID parity calculations
●
72-bit wide 512 MB of DDR2 800 (with ECC)
●
4.3.2

Controller versions

Name
S26361-D3016-Ax LSI SAS2108 512 MB
48
®
data protection
Chip Cache No. of SAS channels
2 for internal disk drives
4 for Storage Blade Connection
Modular RAID Controllers