Raid Controller "Raid Ctrl Sas 6G 1Gb (D3116) - Fujitsu RAID 0/1 SAS based on LSI MegaRAID User Manual

Modular RAID 6Gb/s (SAS2.0)
4.4 RAID Controller "RAID Ctrl SAS 6G 1GB
(D3116)"
V
ATTENTION!
Make sure you observe the safety notes in chapter
information" on page
The RAID controller "RAID Ctrl SAS 6G 1GB (D3116)" is designed to drive the
server's internal disk drives. The RAID stack is based on LSI MegaRAID
offers powerful data throughput, extensive fault-tolerance and easy-to-use
management.
Figure 16: "RAID Ctrl SAS 6G 1GB (D3116)" controller (based on LSI SAS2208)
I
Depending on the target system, the following bracket types are offered:
– Full height perforated
– Full height not perforated
– Low profile perforated
54
9.
"Important
®
and
Modular RAID Controllers