Features - Fujitsu RAID 0/1 SAS based on LSI MegaRAID User Manual

Modular RAID 6Gb/s (SAS2.0)
4.1.1

Features

3.3 V / 12 V PCIe add-in card
●
8 lanes wide 5 Gbit/s PCIe host bus
●
8 SAS / SATA ports
●
each SAS / SATA port supports SSP, SMP, STP, and SATA protocols
●
support of the following STP features:
●
– Addressing of SATA targets thru expander
– Native Command Queuing (NCQ)
support of the following SSP features:
●
– Wide port functionality (2, 3 or 4 Phys from a single quad port)
– Narrow port functionality (1 Phy)
– Compatible with SATA target devices
Mini SAS 4i SFF-8087 multilane connectors
2
●
Drive spin-up sequencing control
●
Hot plug drives
●
1.5 Gbit/s, 3.0 Gbit/s and 6.0 GB/s link rates for both SAS and SATA
●
Supported RAID levels: RAID 0, 1, 1E, 10
●
2 SGPIO interfaces for signaling of the 2 sets of quad SAS/SATA ports
●
RAID-key chip onboard
●
2-pin connector for additional LSI RAID-key (optional)
●
32
Modular RAID Controllers