Rear Stabilizer End Cap - Exerpeutic ExerWorK Series Owner's Manual

Desk recumbent bike
Table of Contents

Advertisement

ADJUSTMENT
Rear Stabilizer (3)
Adjustable Leveler (45)

Rear Stabilizer End Cap (43)

ADJUSTING THE REAR STABILIZER END CAP:
Adjust the Rear Stabilizer End Caps (43) on the Rear Stabilizer (3) as needed to
level the recumbent bike.
ADJUST THE ADJUSTABLE LEVELER:
If the bike is bouncing when in use, turn the Adjustable Leveler (45) so that is
making contact with the floor. Do not extend the Adjustable Leveler (45) too far,
as this will cause the bike to tilt and be off balance.
Backrest (54)
Seat Bracket (6)
Round Knob (50)
ADJUSTING THE SEAT FORWARD OR BACK:
Loosen the Round Knob (50) in a counter-clockwise direction until the seat is
loosen, Standing behind the seat, use two hands to push or pull the Backrest (54).
Once you find the position you like, lock the Seat Bracket (6) into place by turning
the Round Knob (50) in a clockwise direction until it is secured tightly.
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents