Brushless DC Servo Driver K-Cube
Hardware Limit Switches
Note
The minimum velocity and acceleration/deceleration parameters for a
home move are taken from the existing move velocity profile parameters.
The operation of the limit switches is inherent in the design of the associated stage or
actuator. The following parameters notify the system to the action of the switches
when contact is made. Select Reverse or Forward as required, then select the
relevant operation.
Switch Makes - The switch closes on contact
Switch Breaks - The switch opens on contact
Ignore/Absent - The switch is missing, or should be ignored.
6.3.4 Advanced SettingsTab
Fig. 6.5 Advanced Settings
45
Need help?
Do you have a question about the KBD101 and is the answer not in the manual?