Fitting - Festo CP-E16 Series Manual

1. Input module type CP-E16...-M...-...

1.2 Fitting

Input modules are intended for fitting onto walls or hat
rails. For fitting them onto walls you will require the fol-
lowing surface areas:
Type
CP-E16-M8
CP-E16-M12x2-...
Fitting on The diagram below shows the dimensions of the four
a wall threaded holes of screw size M4.
Fig. 1/2: Fitting dimensions CP-E16...-M...-...
CP-E16...-M... 9901b
131.9 mm
139.9 mm
Input module, type CP-E16...-M12x2-...
Input module, type CP-E16...-M8
Surface area
approx. 150 mm x 66 mm
approx. 141 mm x 78 mm
63 mm
40 mm
1-5