Connecting Sensors - Festo CP-E16 Series Manual

1. Input module type CP-E16...-M...-...

1.3.1 Connecting sensors

Use the following cable and plugs for connecting the
sensors.
Type
CP-E16-M12x2
CP-E16-M12x2-5POL
CP-E16-M8
Fasten the plugs with the aid of the union nuts in order
to avoid unintentional loosening e.g. due to vibration.
Seal the unused sensor connections with the protective
caps supplied. Only then is compliance with class of
protection IP65 ensured.
CP-E16...-M... 9901b
Plug Cable
SEA-GS-7 (PG7) KM12-DUO-...
SEA-WS-7 (PG7)
Use the plug with
union nut with
thread M12x1.
Use the plug with KM8-M8-GSGD-...
union nut with
thread M8x1
(outer diameter
max. 12 mm).
1-9