Maintenance
Headlight adjustment
Proceed as follows:
1. Place the vehicle in running order and with the
tyres inflated to the prescribed pressure, on a flat
surface 10 m away from a white screen situated in
a shaded area, making sure that the longitudinal
axis of the vehicle is perpendicular to the screen;
2. Turn on the headlight and check that the bor-
derline of the projected light beam on the screen
is no higher than 9/10 or lower than 7/10 of the
distance from the ground to the centre of the ve-
hicle's headlamp;
3. If otherwise, adjust the right headlight with screw
«A».
N.B.
THE ABOVE PROCEDURE COMPLIES WITH THE EURO-
PEAN STANDARDS REGARDING MAXIMUM AND MINI-
MUM HEIGHT OF LIGHT BEAMS. REFER TO THE STATU-
TORY REGULATIONS IN FORCE IN EVERY COUNTRY
WHERE THE VEHICLE IS USED.
SAS filters inspection and cleaning
Proceed as follows:
- Remove the right-hand side fairing
- Remove the screw on the rear part, to the right
of the footrest, indicated in the photograph
- Remove the spoiler terminal
MAIN - 32
Vespa LX 125 - 150 4T Euro 3