Dmx Channels - SHOWTEC Performer Fresnel Mini DMX Manual

Performer Fresnel Mini DMX
09) Turn the jog wheel to select Para, you can obtain info and control the connected fixture.
10) Press the jog wheel to open the desired menu.
11) The display shows real-time info about the fixture.
12) The parameters that can be selected depend on which fixture is connected. The parameters are for
example Identify Device, Device Info, DMX Start Address etc.
13) Select DMX Start Address and press the jog wheel to open this menu
14) Select Set Parameter and press the jog wheel, the display shows:
15) Select Fresh to update the info or Exit to return to the previous submenu.
16) Press the jog wheel to confirm.
17) Select Set Parameter and press the jog wheel, the display shows:
18) Press the jog wheel to activate the DMX address.
19) Turn the jog wheel to set the DMX address.
20) Select Only Self to choose three different options; Only Self, Same mfrs or All Device.
Select Only self: only the connected fixture will be selected.
Select Same mfrs: only the same fixtures from the same manufacturer will be selected.
Select All Device: all fixtures which are linked to the connected fixture, will be selected.
21) Turn the jog wheel to select Ok&Save to store the DMX address.
22) Press the jog wheel to confirm.
23) Select Exit to return to the previous submenu. Press the jog wheel to confirm.

DMX Channels

Channel 1 –Dimmer
0-255 Dimmer, from closed to open (0-100%)
Ordercode: 33054 15