Appendices - Otto Bock Start M4 XXL Instructions For Use Manual

Temperatures and relative humidity
Relative humidity [%]

12 Appendices

12.1 Required tools
The following tools are required for adjustments and maintenance work:
• Allen key 4 – 6 mm
• Ring and open-ended wrenches in sizes 10, 11, 13, 19 and 24
• Set of screwdrivers
• Torque wrench (measurement range 5-50 Nm)
• Tyre lever
• Tyre pump
12.2 Torque values of the screw connections
Unless otherwise specified, screw connections are tightened with the following torque values:
• Thread diameter M4: 3 Nm
• Thread diameter M5: 5 Nm
• Thread diameter M6: 10 Nm
• Thread diameter M8: 25 Nm
Start M4 XXL, Start M6 Junior
45 to 85
Appendices
29