Recordings; Replaying Recordings; Replaying The 5 Minutes Of A Channel Most Recently Recorded; Replaying Specific Recordings - Monacor IOR-204 Instruction Manual

7.6 Recordings

According to the factory settings, the recorder will, after it is
switched on, record all channels to which a camera is con-
nected. In addition or when the recording times have been
changed (see chapter 6.6.5), recording can be manually started.
To start recording for a specific channel
1) Use the left mouse button to click the live image to be
recorded. (In the single-image mode, simply press the left
mouse button.) The quick-selection bar will appear.
Fig. 7-11 Quick-selection bar
2) Click the camera symbol
afterwards and the colour of the symbol will change to red.
3) To stop recording, click the symbol
As an alternative, use the button
start manual recordings, and the button ■ to stop manual
recordings. In the multi-image mode, the camera whose image
is highlighted by a blue frame will be recorded. If required,
before recording is started, use the numeric buttons to switch
to the full-screen mode.
To start recording for multiple channels
1) Use the right mouse button to show the toolbar.
HD 2) Click the symbol
SD
toolbar. The window for manual recordings will appear.
3) To start a recording, click the symbol ⃠ of the respective
channels in the column "Manual Record"; to stop a re-
cording, click ✔.

7.7 Replaying recordings

A current recording will not be interrupted when a recording
is being replayed.
7.7.1 Replaying the 5 minutes of a channel
most recently recorded
1) Use the left mouse button to click the live camera image
whose recording is to be replayed. The quick-selection bar
will appear (Fig. 7-11).
2) Click the symbol
recently recorded will start and a control bar will be shown:
Fig. 7-12 Replay control bar
3) To pause and continue the replay, use the buttons
and .
4) To view single images one after the other, click the pause
symbol repeatedly.
5) For fast forward or fast reverse, keep the left mouse button
pressed and move the replay button forwards or back-
wards.
6) To stop the replay any time, click

7.7.2 Replaying specific recordings

Saving a section of a recording

on an external device

To show the replay window, press the button  on the remote
control; as an alternative, use the right button to show the
toolbar and then, in the toolbar, click the first symbol
the left to call up the start menu and finally, in the start menu,
click "Search".
HD
. Recording will start shortly
HD
again.
on the remote control to

i 15/09/2019 14:27:38
located in the right section of the
. The replay of the 5 minutes most
HD
×
.
Search
General Events Sub-periods
Date
09/28/2019
Search Type
Normal Motion
IO PIR
PID LCD
SOD PD
FD CC
Sound Occlusion
Manual
Stream Type Mainstream
Channel
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
00:00 02:00
Normal Motion
Fig. 7-13 Replay window
The following submenus are available:
HD
General | Events | Sub-periods | Smart | Tag | External File
The name of the submenu called up is underlined and shown
in turquoise. To go to a different submenu, click the name
of the submenu. This chapter describes the functions of the
submenu "General".
1) When the replay window appears, the current day is se-
lected as the search date (in the upper left beneath the
magnifier symbol). To search for recordings of a different
day, click the calendar symbol.
2) On the left side of the window, select the channels whose
recordings are to be replayed. As soon as a channel is se-
lected and if recordings of this channel are available, the
recordings are indicated as bar graphs in the hours overview
at the bottom of the window.
3) To replay, click the symbol
To go to a specific recording time, click, using the mouse
pointer, the corresponding time on the bar graph in the
hours overview.
4) Further functions are described in the following table:
Field /
Function
Symbol
Date Date of the recordings to be searched for
To search for specific recordings, restrict the reason why
Search the recordings were triggered, e. g. to:
Type Normal (time-controlled), IO, Manual, Motion, PIR (trig-
gered by a camera with IR motion sensor)
Stream
To select "Mainstream" or "Substream"
Type
To select the camera channels;
Channel
select at least one channel
Functions at the bottom of the window
The menu fields and control symbols will be hidden; the
view will be enlarged.
To return to the complete view, move the mouse pointer
to the lower edge of the image so that the control sym-
bols are shown again and then click the symbol again
*
Fast reverse
*
Slow motion forward
Replay at normal speed
Pause
*
Next frame
Stop replay
to
HD
SD
*
Fast forward
*Click symbol repeatedly, if required
Smart Tag External File
09/28/2019 07:16:48
Pause
04:00 06:00 07:16:48 08:00 10:00 12:00 14:00
09/28/2019
IO PIR Intelligent Alarm Manual
(above the hours overview).
Options on the left
i
09/28/2019 07:16:48
24h 2h 1h 30m
16:00 18:00 20:00 22:00 00:00
Indication to the right,
next to the symbols
<< X 2 ... 16
SLOW 1/2 ... 1/16
Play
Pause
Step
Stop
15/09/2019 14:27:38
>> X 2 ... 16
47