Sound Reproduction; Operating Bars - Fast Access To Settings, Functions And Information; Adjusting Colour, Brightness, Contrast - Monacor IOR-204 Instruction Manual

view a different section, keep the left mouse button pressed
and move the section magnified.
4) To hide the thumbnail view, press the right mouse button.
Then you can double-click the left mouse button to go back
to the normal view.

7.3.2 Sound reproduction

Only the sound of the camera channel displayed in full-screen
mode or, in the multi-image mode, only the sound of the image
highlighted by a blue frame (to be selected with the left mouse
button) will be reproduced.
1) To adjust the volume, show the toolbar (Fig. 7-8) with the
right mouse button.
2) Click the speaker symbol
appear.
3) Keep the left mouse button pressed and adjust the volume
with the slider.
4) To mute the sound, click the speaker symbol located directly
beneath the slider. Proceed in the same way to unmute
the sound.
To mute and unmute the sound, the button MUTE on the re-
mote control may be used as well. Please note that the volume
control (slider) must not be shown.
7.4 Operating bars – fast access to settings,
functions and information
For fast access to the setting menus and the most important
functions, the toolbar (click the right mouse button to show
it) is available; for each camera, the quick-access bar (click the
desired camera image with the left mouse button) is provided.
Fig. 7-8 Toolbar
Symbol Function
To call up the start menu for user change, search function,
settings, locking / unlocking, switch-off / restart
View with four camera images
Depending on the recorder model, additional symbols for
further multi-image layouts are available.
View with camera images of different size
To start the sequence of all camera images in full-screen
HD
SD
mode (chapter 7.3)
To replay the most recent 5 sec., 10 sec., 30 sec., 1 min. or
5 min. of the current recording (to select the time, click
HD
or to replay the recording from its beginning (click
SD
chapter 7.7.2.
To return to live surveillance, press the right mouse button.
To adjust the volume, to mute / unmute the sound
HD
SD
(chapter 7.3.2)
Stream switch for IP cameras
(only relevant for live surveillance):
HD
SD "Mainstream" = high resolution, high data volume
"Substream"
The "Preview Policy" defines the priorities to be applied
when system utilization has reached 100%
Realtime = highest frame rate possible, lower image quality
HD
SD
Balanced = medium frame rate, medium image quality
Smooth = highest image quality possible, fewer frames per
second
46
HD
SD
HD
SD
HD
SD
. A volume control (slider) will HD
SD
i
HD
SD
HD
SD
HD
SD
HD
SD
i
i 15/09/2019 14:27:38
i 15/09/2019 14:27:38
= lower resolution, lower data volume
i 15/09/2019 14:27:38
Symbol Function
i 15/09/2019 14:27:38
Fig. 7-9 Quick-selection bar with functions for each camera image
Symbol Function
i 15/09/2019 14:27:38
HD
HD SD
HD

7.5 Adjusting colour, brightness, contrast

1) Use the left mouse button to click the live image to be
adjusted. (In the single-image mode, simply press the left
09/15/2019 14:27:38
mouse button.) The quick-selection bar will appear (Fig. 7-9).
2) Click the colour palette symbol
displayed in the single-image mode and the menu for the
image settings will appear:
i 15/09/2019 14:27:38
i 15/09/2019 14:27:38
Channel
HUE
i 15/09/2019 14:27:38
BRIGHT
CONTRAST
i
15/09/2019 14:27:38
SATURATION
)

15/09/2019 14:27:38
; see
Fig. 7-10 Menu for the image settings
)
Menu item
Channel
HUE
BRIGHT
CONTRAST
SATURATION To adjust the saturation
Default
Save
Cancel
3) To go back to the previous view after the menu has been
exited, double-click with the left mouse button.
This symbol will appear when the recorder is not connected
i 15/09/2019 14:27:38
to a network.
To show a window for manual recordings; to start record-
ing, click the symbol ⃠ of the channel desired; to stop
i 15/09/2019 14:27:38
recording, click ✔.
To show different types of information
HD
To start or stop recording manually (chapter 7.6)
HD
To replay the 5 minutes most recently recorded
HD
(chapter 7.7.1)
To call up the control menu for a PTZ camera (chapter 7.8)
This symbol will only be shown when a PTZ camera is
HD
available
To magnify an image section (chapter 7.3.1)
HD
To adjust colour, brightness and contrast (chapter 7.5)
To switch between "Mainstream" (HD) and "Substream" (SD)
(also see symbol HD in the toolbar)
SD
Add a tag at the current position of the recording so that it
will be easier to search for specific recordings (start menu
 Search  Tag)
Color Settings
CH2
Default Save Cancel
Function
To switch to a different camera channel
To adjust the hue
To adjust the brightness
To adjust the contrast
To reset this menu to its factory settings
To save the settings
To cancel the setting
i 15/09/2019 14:27:38
. The live image will be
HD
128
128
128
128