Deleting Data / Formatting The Hard Disk; Calling Up The Event List; Switching Off Or Restarting The Recorder - Monacor IOR-204 Instruction Manual

7.9 Deleting data / Formatting the hard disk

If you want to dispose of the recorder or plan to give (e. g.
sell or lend) it to a third party, make sure to delete all record-
ings and passwords: Reset the recorder to its factory settings
(chapter 6.6.11) and format the hard disk. Otherwise, you will
pass on your recordings, personal data and passwords with
the recorder.
1) Use the right mouse button to show the toolbar; in the
toolbar, click the first symbol to the left
start menu and then, in the start menu, click "Setup" to
call up the tile menu.
2) In the tile "Device", click the menu item "Disk".
Disk
No. Model
1* WDC WD20PURX-64P6Y0 WD-WCC4M7FXADU 80.00A80
Overwrite Auto Format HDD
Fig. 7-16 Disk Manager
3) In the column "No.", select the hard disk to be formatted
and then click the button "Format HDD". The following
warning will appear:
Notice
Entire data will be erased, do you want to continue?
OK Cancel
Fig. 7-17 Warning and confirmation window
4) Click "Cancel" to cancel the procedure. To format the hard
disk, click "OK": A status bar will indicate the progress of
the formatting process.
Notice
No. 1 Formatting...37%
37%
Fig. 7-18 Formatting process
5) When formatting has been completed, the following mes-
sage will be shown:
Notice
Format completed !
OK
Fig. 7-19 Hard disk formatted
6) Click "OK" and then click
to call up the
Serial No. Firmware Statue Free/Total
Normal 1810G/1863G
Default
×
to close the disk manager.

7.10 Calling up the event list

The recorder logs all events such as switch-on and switch-off
of the recorder, change of user, manual recording, replay of a
recording, changes to settings, etc.
1) Use the right mouse button to show the toolbar. In the
toolbar, click the first symbol to the left
start menu and then, in the start menu, click "Setup" to
call up the tile menu.
2) In the tile "System", click the menu item "Maintenance".
HD
SD
3) The submenus "Log" ... "Auto Reboot" are available.
The submenu "Log" must be selected as shown in the
following figure.
Log Load Default Upgrade
Start Date 10/13/2019
Free/Total Time
End Date 10/13/2019
411Hour/423Hour
Log Typ All
Channel Type
Accout
System
Alarm
Accout
Congfiguration
Congfiguration
CH4 Alarm
CH4 Alarm
Accout
Accout
Apply
Fig. 7-20 Event list after a search request
Menu item
Symbol
Start Date
End Date
Start Time
End Time
Log Typ
Search
Backup
To make sure that any operation at the recorder is shown in the
log, the log entries will not be deleted when the hard disk is
formatted or when the recorder is reset to its factory settings.

7.11 Switching off or restarting the recorder

Prior to using the POWER switch, shut down the recorder
properly. Otherwise, settings or current recordings may be lost.
1) Use the right mouse button to show the toolbar; in the
toolbar, click the first symbol to the left
start menu, and then, in the start menu, click "Shutdown".
Fig. 7-21 Selection window for switch-off, restart and user change
i 15/09/2019 14:27:38
Parameter Management Auto Reboot
Start Time 00:00:00
End Time 23:59:59
TIME CON.
10/13/2019 05:43:27 admin Login
10/13/2019 05:43:28 System Startup
10/13/2019 05:43:31 IO Alarm Start
10/13/2019 05:43:36 Unlock
10/13/2019 06:11:54 Multi-User
10/13/2019 06:11:54 Add User
10/13/2019 07:52:47 Motion Start
10/13/2019 07:53:16 Motion End
10/13/2019 14:14:09 admin Logout
10/13/2019 14:15:12 user1 Login
Function
Time range of the events
to be shown
Selection of an event group: All, System, Configura-
tion, Alarm, Account, Record, Storage
Click to list the events with the parameters selected
To browse the list:
First page / previous page / next page / last page
When a recording has been made of an event, click
the symbol to view the recording
To save the list to a USB flash drive, for example
Shutdown
What do you want the computer to do?
Shutdown
Reboot
Logout
OK Cancel
to call up the HD
SD
Search
RECORD Playback
No
Yes
Yes
1 /3
Backup
to call up the
HD
SD
49